Description

Connector Options :

first cut the exposed traces on the top side of the board which short out resistors R1 through R4 (which are not normally installed)

(You must supply your own FD1771 or equivalent (Usually taken out of the Expansion Interface where you plug this into)

Gold-plated connectors for reliability - one less connector to worry about on your Model I

Floppy driver with 34pin interface

TRS-80 Color Computer 2 [26-3026 / 26-3027] Bare Motherboard trs-80-model-4p Connector Options :This is an ENIG print of the Rocky Hill TRS 80 Color Computer 2 [26 3026 26 3027]. This project was created from schematics that are available in several locations including the "Service Manual: TRS 80 Color Computer 2 NTSC Version (Catalog Number: 26 3026 7)" Completed Schematic Bill Of Materials PCB Tested PCB fit: Needed slight adjustment but usable Keyboard: Works. Audio Video: Works. Joystick ports: Works. I O port: Works. Cassette port + relay:

Exchange/Return Notes