Delrin Shifter Bushing Set for Manual Transmission Mopar Size:(4) Identical Bushings While the stock crank pulley

While the stock crank pulley is made surprisingly light

mid-profile (with a low-profile embroidery area)

This Feed Ramp is CNC milled from a single piece of hardened 6061 Aluminum

rare earth bar magnets to allow a strong hold

Longer bolts or studs will be required (not included)

Delrin Shifter Bushing Set for Manual Transmission Mopar Size:(4) Identical Bushings While the stock crank pulleyThese Delrin bushings are for manual transmissions only. Please check your vehicles stock rubber bushings to insure these will work. There are two slightly different versions of the stock bushings. Most new Mopar vehicles have all (4) bushings the same size. Some older vehicles use (3) small and (1) large bushing. The large bushing will be on the firewall side of the transmission, and are prone to deteriorating and causing shifting problems. All (4)